

Official stand for Raspberry Pi 7-inch touchscreen
9,00 € INCL. VAT
- Protects your touchscreen and Raspberry Pi, keeping the screen upright on your desk.
- Cut-outs for connectors, camera slot, wall mounting and clip-on back cover.
- For the official Raspberry Pi 7-inch 800 × 480 touchscreen.
Business, school or public body? business account Education offers

Official stand for Raspberry Pi 7-inch touchscreen
9,00 € INCL. VAT
- Description
- Additional information
Description
Raspberry Pi 7-inch screen stand: protect and display your official touchscreen
The official Raspberry Pi 7-inch touchscreen comes bare, with its circuit board exposed: this Raspberry Pi screen stand is here to enclose it. The official documentation is clear: it must be mounted in a suitable enclosure while in operation. This screen stand for the Raspberry Pi 7-inch display holds it with the Raspberry Pi board attached to the back, keeps it tilted on the desk and protects the whole assembly day to day.
Highlights
- Protection of the electronics : the screen's board and the Raspberry Pi are covered, as required by the screen's documentation.
- Screen held upright on a desk, counter or worktop.
- Cut-outs for the connectors and a slot for a camera ribbon cable.
- Wall mounting possible for a control panel.
- Clip-on back cover : quick access to the connectors without taking everything apart; four screws to secure the screen.
Specifications of the supported screen
| Features | Official 7-inch touchscreen (1st generation) |
|---|---|
| Resolution | 800 × 480 pixels, 24-bit |
| Touch | Multi-touch, up to 10 points |
| Viewable area | 154.08 × 85.92 mm |
| Outer dimensions | 192.96 × 110.76 mm |
| Connection | DSI (ribbon cable) + power via GPIO wires |
| Consumption | 200 mA at 5 V typical, maximum brightness |
| Compatible boards | Raspberry Pi B+ and later (mounted on the back of the screen) |
Which one should you choose?
| Screen | Resolution | Boards | Support |
|---|---|---|---|
| Official 7-inch touchscreen | 800 × 480 | Pi B+ to Pi 4; Pi 5 with suitable ribbon cable | This stand |
| Raspberry Pi Touch Display 2 | 720 × 1280 (7-inch) | Pi 5, Pi 4 and others | Compatibility with this stand not documented |
| Touch Display 2 10.1-inch | 1200 × 1920 | Pi 5 and Compute Modules only | Not suitable |
| Capacitive touchscreen with stand | See product page | Pi 5 | Stand included |
Our advice : this stand is made for the first-generation official 7-inch screen, the most widely used in kiosk and dashboard projects. For a Touch Display 2, ask us before ordering: we will point you to the right solution.
Compatibility and pitfalls to avoid
- Supported screen : official 7-inch 800 × 480 touchscreen (first generation).
- Boards : Raspberry Pi 4 and Pi 3 mount on the back of the screen with the DSI ribbon cable supplied with the screen.
- Raspberry Pi 5 : the screen works with a 22 to 15-pin ribbon cable sold separately; fitting the Pi 5 in this stand is not documented, contact us.
- Pi Zero, Pi 400 and Pi 500 : no DSI connector, so no official screen.
- Screen and Raspberry Pi not included with this stand.
Recommended accessories
- The official 15.3 W USB-C power supply : it powers the Pi 4, which in turn powers the screen via the GPIO.
- The 8 MP Camera Module v2 : the stand's slot lets you build a video doorphone or a kiosk with a camera.
- The official Raspberry Pi AZERTY keyboard for initial setup.
Uses and projects
Home automation dashboard on a sideboard, interactive kiosk for a museum or exhibition, wall-mounted control panel, photo frame, 3D printer control screen: for home automation, see our Home Assistant and smart home solutions.
Frequently asked questions
Is this stand suitable for the Touch Display 2?
This is not documented: it is designed for the first-generation official 7-inch screen. Contact us before pairing it with a Touch Display 2.
Can it hold a Raspberry Pi 5?
The screen works with the Pi 5 thanks to a 22 to 15-pin ribbon cable, but fitting the Pi 5 in this stand is not documented.
Is the Raspberry Pi enclosed in the stand?
Yes, the board mounted on the back of the screen is protected by the clip-on back cover.
Can the stand be wall-mounted?
Yes, it has a built-in wall mount.
Does the display need a separate power supply?
No, the official 7-inch screen is powered by the Raspberry Pi via two wires on the GPIO.
Can I add a camera?
Yes, a slot lets you pass a camera module's ribbon cable through.
Order your Raspberry Pi 7-inch screen stand on monraspberry.com : official, tested product, stock based in France, shipping within 24/48 h after receipt of payment, free pickup point delivery on orders from €200, returns possible within 14 days with return authorization, and payment by Visa, Mastercard, PayPal, Apple Pay or Google Pay.
Additional information
| Accessory type | Peripherals |
|---|







