-
Test and debugging toolsTotal Phase Beagle USB 5000 v2 Ultimate: USB 3.0 protocol analyzer
6395,90 € INCL. VATIn stock -
Test and debugging tools
Total Phase Beagle I2C/SPI: I2C, SPI and MDIO protocol analyzer
477,90 € INCL. VATOut of stock -
Test and debugging tools
Total Phase Beagle USB 12: USB 1.1 protocol analyzer, 12 Mbit/s
526,90 € INCL. VATOut of stock -
Test and debugging tools
Total Phase Beagle USB 480: USB 2.0 protocol analyzer, 480 Mbit/s
1310,90 € INCL. VATOut of stock -
Test and debugging tools
Total Phase Cheetah: high-speed USB to SPI host adapter
465,90 € INCL. VATOut of stock
Total Phase: protocol analyzers and adapters for embedded systems
Total Phase designs debugging and development tools for engineers working on embedded systems. Its stated mission is to provide visibility into what happens inside these systems, with affordable, high-quality, high-performance solutions. This page presents the models we have selected and helps you choose the one that matches your bus and your need: observing an exchange or controlling it. To compare with the shop's other tools, see the category Test and debugging tools.
A brand of tools for embedded systems
The company states that its tools are used by Fortune 500 companies as well as small businesses and research institutes. It highlights the ease of use and integration of its products, and says it takes customer feedback into account to improve them. Its devices are made in the USA.
Its catalog notably covers the I2C, SPI, USB and CAN buses. The Beagle analyzers and Cheetah adapter shown here connect to a computer over USB and are used with free downloadable software, on Windows, Linux and macOS.
Analyzer or adapter: which should you choose?
A protocol analyzer listens to a bus without disturbing it and displays what travels on it: it is the tool for understanding an exchange or finding an error. A host adapter on the other hand plays an active role on the bus: it sends commands and can program a memory.
| Reference | Purpose | Bus and rate | For whom |
|---|---|---|---|
| Beagle I2C/SPI (TP320121) | Analyzer | I2C 4 MHz, SPI 24 MHz, MDIO 2.5 MHz | Debugging serial bus based boards |
| Cheetah (TP280121) | Host adapter | SPI master, 0.1 to 40+ MHz | Programming SPI Flash and EEPROM memories |
| Beagle USB 12 (TP320221) | Analyzer | USB Full and Low Speed, 12 Mbit/s | USB devices up to 12 Mbit/s |
| Beagle USB 480 (TP320510) | Analyzer | USB 2.0 up to 480 Mbit/s | USB 2.0 High Speed devices |
| Beagle USB 5000 v2 Ultimate Edition (TP322610) | Analyzer | USB 3.0 and USB 2.0 simultaneously, up to 5 Gbit/s | USB 3.0 development and advanced debugging |
Total Phase Beagle I2C/SPI: I2C, SPI and MDIO protocol analyzer477,90 € INCL. VATOut of stockOut of stockView the product
Total Phase Cheetah: high-speed USB to SPI host adapter465,90 € INCL. VATOut of stockOut of stockView the product
Total Phase Beagle USB 12: USB 1.1 protocol analyzer, 12 Mbit/s526,90 € INCL. VATOut of stockOut of stockView the product
Total Phase Beagle USB 480: USB 2.0 protocol analyzer, 480 Mbit/s1310,90 € INCL. VATOut of stockOut of stockView the productBeagle USB analyzers
Beagle USB 12
It monitors Full Speed and Low Speed non-intrusively, with 21 ns resolution and USB descriptor decoding. Powered by the USB bus, it suits devices that do not exceed 12 Mbit/s.
Beagle USB 480
It goes up to High Speed at 480 Mbit/s, with 16.67 ns resolution, a 64 MB onboard buffer, real-time USB class decoding and 4 digital inputs and 4 outputs to synchronize with external logic.
Beagle USB 5000 v2 Ultimate Edition
It monitors USB 3.0 and USB 2.0 simultaneously, up to 5 Gbit/s. It has a 4 GB buffer, advanced state-based triggers and synchronization between several analyzers to follow traffic across hubs.
Total Phase Beagle USB 5000 v2 Ultimate: USB 3.0 protocol analyzer6395,90 € INCL. VATIn stockIn stockAdd to cartI2C and SPI tools
Beagle I2C/SPI
This portable analyzer monitors I2C, SPI and MDIO, with bit-level timing down to 20 ns. Data is streamed continuously to the computer and packets are displayed decoded, in real time. MDIO is used with the API and Data Center software version 2.20.
Cheetah
This USB to SPI adapter works as a master, at over 40 MHz, with up to 3 slave selects. It was designed to communicate with SPI Flash memories and program them, in-system or stand-alone.
Frequently asked questions
Is Total Phase software paid?
The Data Center software, APIs and LabVIEW drivers for the products shown here are offered free of charge by the manufacturer, as downloads.
Which operating system do you need?
Total Phase lists Windows 7, 10, 11 and later, the Linux distributions Red Hat, SuSE, Ubuntu and Fedora, and macOS 13 and later.
Can I install this software on a Raspberry Pi?
The manufacturer specifies a computer with an Intel or AMD processor as the minimum configuration and does not mention the Raspberry Pi. Plan on a PC or Mac as your analysis computer.
Which USB analyzer should you choose?
Start from your device's speed: up to 12 Mbit/s, the Beagle USB 12 is enough; up to 480 Mbit/s, you need the Beagle USB 480; for USB 3.0, the Beagle USB 5000 v2.